新川サーバー | エンタープライズ サーバー ハードウェア サプライヤー
SATA SSDs Are on Borrowed Time
For a decade, SATA SSDs were the default choice for boot drives, read-intensive caches, and general-purpose server storage. They were cheap, compatible, and fast enough. で 2026, that era is ending. Dell’s latest PowerEdge R470, R670, and R770 servers have dropped SATA from their primary drive bay designs entirely – moving to E3.S Gen5 NVMe as the default storage interface. xFusion’s FusionServer V7 lineup follows the same trajectory. The writing is on the wall: if your storage strategy still revolves around SATA, your next server refresh will force a rethink.
Why E3.S Is Winning Over U.2
The 2.5-inch U.2 form factor served NVMe well for years – it fit in existing SATA/SAS bays and smoothed the transition from SATA SSDs to NVMe. But U.2 has limits: 15mm thickness restricts thermal headroom, the connector is bulky, and drive density per server is capped by physical bay count.
E3.S (Enterprise and Data Center SSD Form Factor, formerly EDSFF) solves all three problems:
| 属性 | U.2 (2.5-インチ) | E3.S (EDSFF) |
|---|---|---|
| Form factor height | 15んん (single option) | 7.5んん (E3.S 1T) or 16.8mm (E3.S 2T) |
| Power delivery | 25W max via connector | Up to 40W; better for Gen5 speeds |
| Hot-swap | サポートされています | サポートされています; improved airflow path |
| Density per 1U | ~10 drives | ~20 drives (E3.S 1T, dual rows) |
| PCIe lanes per bay | x4 (fixed) | x4 or x8; configurable per bay |
| Adoption in 2026 サーバー | Still supported on mainstream platforms | Default on Dell R470/R670/R770 and xFusion V7 |
The density advantage is the killer feature. The Dell R670 fits up to 20 E3.S drives in a 1U chassis – double what U.2 can deliver in the same space. For all-flash vSAN, Ceph, and database clusters, that is the difference between one node and two.
NVMe Gen5: More Than Just Faster Sequential Reads
PCIe 5.0 doubles per-lane bandwidth from 16 GT/s (Gen4) に 32 GT/s (Gen5). For a 4-lane NVMe drive, that means a theoretical ceiling of ~14 GB/s – roughly double Gen4’s ~7 GB/s. But in practice, most enterprise SSDs will not saturate a Gen5 x4 link in 2026. The real benefit is elsewhere:
- Fewer lanes per drive: An NVMe Gen4 drive that needs x4 lanes can run on x2 Gen5 lanes with the same throughput. This frees up PCIe lanes for GPUs, network cards, and accelerators – a critical advantage on GPU servers like the XE9680.
- Lower latency: Gen5 controllers reduce command latency by 15-20% compared to Gen4, even at the same throughput. For OLTP databases and AI inference serving, every microsecond counts.
- CXL memory tiering: Gen5 PCIe is a prerequisite for CXL (Compute Express Link) memory expansion, which will blur the line between DRAM and NVMe storage in upcoming server platforms.
DWPD Is the New Capacity Metric
Buying SSDs by capacity alone is a rookie mistake in 2026. 持久力 (measured in DWPD – Drive Writes Per Day) matters as much as terabytes because different workload tiers demand different endurance profiles:
| DWPD | Drive Class | Typical Use Case | Example Product |
|---|---|---|---|
| 0.3 – 1 | Read-intensive | CDN, streaming, boot drives | OceanDisk 300P (1 DWPD) |
| 1 – 3 | Mixed-use | 仮想化, データベース | OceanDisk 500P (3 DWPD) |
| 3 – 10 | Write-intensive | OLTP logging, キャッシング, journaling | Write-intensive enterprise class |
| 10+ | Ultra-endurance | Persistent memory replacement, HPC checkpointing | Storage Class Memory (SCM) |
Putting a 1 DWPD drive in a write-heavy OLTP logging workload burns it out in months. Putting a 3 DWPD drive in a read-only CDN node wastes budget. Matching endurance to workload is the fastest path to lowering storage TCO.
What This Means for Your Next Server Refresh
If your current servers use SATA or SAS SSDs, your next platform will force a transition to NVMe – and likely to E3.S. Here is a practical migration playbook:
- Audit your existing SSDs by endurance, not just capacity. Map each drive to its actual workload profile. You will likely find mismatches – 3 DWPD drives serving static content, また 1 DWPD drives in write-heavy database volumes.
- Plan for the connector transition. SATA and U.2 cables do not work with E3.S bays. Budget for new drive carriers and possibly new backplanes. The good news: most 2026 servers ship with E3.S-native backplanes, so you are buying the right infrastructure from day one.
- Right-size your Gen5 PCIe lane budget. If you run 4-lane NVMe drives on Gen5, check whether 2-lane operation covers your throughput needs – the freed lanes can go to network adapters or accelerators.
- Do not over-provision endurance. 3 DWPD drives cost 30-50% more than 1 DWPD equivalents. Unless your workload actually writes at that rate, you are paying for endurance you will never use.
Source Your Enterprise Storage Transition Through Xincuan
We stock the full range of enterprise SSDs across 1 DWPD and 3 DWPD tiers, in both U.2 and E3.S form factors – including the Huawei OceanDisk 300P and 500P series. Our engineers can audit your current storage fleet and build a phased migration plan that aligns with your server refresh cycles. Factory-direct pricing, 3-year manufacturer warranty, and global shipping included.
Request a storage migration consultation and quote
Explore storage products: Enterprise SSDs | Enterprise HDDs | Storage Solutions | すべての製品