% % %

Vous avez un serveur/

 

Mellanox ConnectX-7 | 400GbE NDR200 InfiniBand Adapter

Your GPU Cluster Is Sitting Idle. The Problem Is Not the GPUs.You have eight XE9680 servers, each with 8x H100 GPUs. That is 64 H100s. Your training job should finish in 12 heures. Monitoring shows GPU utilization at 45%. The bottleneck is not compute — it is the 100GbE fabric between the nodes. Every gradient synchronization step stalls waiting for the network. That fabric is where the NDR200 InfiniBand adapter earns its place.The Mellanox ConnectX-7 is a single-port 400Gb/s InfiniBand NDR200 (or 400GbE Ethernet) adapter built for the inter-node communication that multi-GPU AI training demands. With RDMA, GPUDirect, and in-network computing acceleration, it moves data between GPU memory and the network fabric without touching the host CPU or system memory.Technical

  • détails du produit

Your GPU Cluster Is Sitting Idle. The Problem Is Not the GPUs.

You have eight XE9680 servers, each with 8x H100 GPUs. That is 64 H100s. Your training job should finish in 12 heures. Monitoring shows GPU utilization at 45%. The bottleneck is not compute — it is the 100GbE fabric between the nodes. Every gradient synchronization step stalls waiting for the network. That fabric is where the NDR200 InfiniBand adapter earns its place.

The Mellanox ConnectX-7 is a single-port 400Gb/s InfiniBand NDR200 (or 400GbE Ethernet) adapter built for the inter-node communication that multi-GPU AI training demands. With RDMA, GPUDirect, and in-network computing acceleration, it moves data between GPU memory and the network fabric without touching the host CPU or system memory.

Spécifications techniques

Paramètre spécification
Modèle Mellanox ConnectX-7 (MCX755106AS-HEAT or equivalent)
Port Configuration 1x QSFP112 (400Go/s) or 2x QSFP56 (200Go/s), configurable
InfiniBand NDR200 (400 Gb/s per port), backward-compatible with HDR100/EDR/FDR
Ethernet 400Porter / 200Porter / 100Porter / 50Porter / 25Porter / 10Porter (RoCE v2)
Host Interface PCIe 5.0 x16 (512 Gb/s theoretical)
RDMA InfiniBand RDMA, RoCE v2, GPUDirect RDMA, GPUDirect Storage
Message Rate Jusqu'à 215 million messages per second
Latence (IB) < 600 nanoseconds (port-to-port)
In-Network Computing SHARP (Scalable Hierarchical Aggregation and Reduction Protocol), MPI Allreduce offload
Chiffrement Inline TLS/DTLS, IPsec, MACsec (hardware-accelerated, line rate)
CPU Offload RDMA, NVMe-oF, SR-IOV, VirtIO, vDPA
NVIDIA Networking NVIDIA Magnum IO, NCCL, UFM (Unified Fabric Manager) compatible
Facteur de forme Low-profile PCIe, FHHL bracket included
Pouvoir ~25W typical, ~38W max
Physical 167 X 69 millimètre (standard LP card)
Température 0°C to 55°C
Prise en charge du système d'exploitation RHEL 8.6+/9.x, Ubuntu 20.04/22.04/24.04, SLES 15 SP4+, VMware ESXi 8.0+, Windows Server 2022/2025
garantie 3-année (fabricant)

NDR200 InfiniBand vs 400GbE Ethernet — Which Fabric for AI?

Facteur de décision NDR200 InfiniBand 400GbE RoCE v2
Tail latency (P99.9) Consistent, predictable. In-network congestion control. Varies with DCQCN/ECN tuning. Requires expertise.
GPU Direct RDMA Fully supported and optimized (NVIDIA Magnum IO stack) Supported but requires careful buffer registration.
SHARP (in-network allreduce) Prise en charge. Reduces gradient sync time by up to 30%. Not available. Allreduce runs on host CPUs.
Switch ecosystem NVIDIA Quantum-2 NDR switches. Managed fabric (UFM). Any 400GbE switch (Arista, Cisco, NVIDIA Spectrum-4).
Learning curve Higher. Requires InfiniBand subnet manager and fabric management. Lower. Familiar Ethernet tooling, IP-based routing.
Best for Dedicated AI training clusters, CHP, GPU-intensive workloads. Converged data center fabrics, mixed AI+enterprise workloads.
Cost (per port, adapter + switch) Premium. Higher per-port cost. Lower. Ethernet ecosystem scale economics.

Plateformes de serveur compatibles

PCIe 5.0 x16 slot required for full bandwidth. Compatible with Dell PowerEdge R770, R7715, XE9680, xFusion G5500 V7, 2488H V7, 5885H V7, and any server with a PCIe 5.0 x16 electrical slot and adequate chassis airflow. Single-port QSFP112 configuration requires a QSFP112 passive copper DAC or active optical cable to the switch.

Source via Xincuan

We supply ConnectX-7 adapters pre-installed in Dell and xFusion servers, or as standalone upgrade kits. Tarification directe en usine, 3-an de garantie, and global shipping.

Request a ConnectX-7 quote

Précédent:

Laisser un commentaire

Téléphone +86 18001060290

LinkedIn LinkedIn

Skype +86 18001060290

Whatsapp +86 18001060290

Code QR WeChat WeChat

E-mail admin@sell-server.com

WeChat

WeChat QR Code

Scannez le code QR avec WeChat